Portable Camping Backpacking Stove with Flow Regulator for EN417 Lindal Valve XD-1

$35.80

  • DIMENSIONS(UNFOLDED) : 6.61″x6.61″x3.54″ / 16.8×16.8x9cm *Hose is not included. DIMENSIONS(FOLDED) : 4.29″x4.29″x4.09″ / 10.9×10.9×10.4cm
  • WEIGHT : 13.76oz / 390g
  • INTERNAL FLAME COMBUSTION : It shortens the boiling time and improves the efficiency of gas fuel consumption.
  • LARGE POT SUPPORTED : With Φ6.61’’/16.8cm pot support, you can use a cooker (about 2.0 L) or a frying pan on it. With wind-resistant plate legs, it can stand stability.
  • FOLDABLE & CAMPACT : You can fold it and put it into storage case. Very convenient to carry with.
  • USE FUEL INVERTED : By using with circle holder, you can place fuel canister inverted to use, it allows for more powerful fuel injection for a consistent output, regardless of weather.
  • 【Inlet: EN417 Lindal Valve type gas canister.】 If you want to use 1lb propane tank or butane canister with this stove, you also need to use our convert adapter Z22 or Z10.
  • Package include: 1 * Gas Stove XD-1; 1 * Storage case ; 1 * Circle holder

Portable Camping Backpacking Stove with Flow Regulator for EN417 Lindal Valve XD-1

 

logo

con-1

Portable Camping Gas Stove with Flow Regulator

  • Campingmoon’s gas stove is foldable and can be put into attached storage case to carry with. It is suitable for your camping, backpacking, hunting, BBQ, barbecue and other outdoor occasions.
  • It has high heat power. We tested that it can boil 1L water less than 4 minutes in a condition of room temperature is 15 degrees.
  • Fifty gas holes injected at the same time, which can save no less than 10% of the gas compared with other camping gas stove in the same power level, improve the combustion efficiency and heating speed.

 

 

camping gas stove

STAND STABILITY

 

  • This backpacking gas stove is designed to have a low center of gravity and a well-balanced sense of stability.

 

con-3-3

USE EN417 LINDAL VALVE TYPE GAS CANISTER

 

  • Please use EN417 Lindal Valve type gas canister for this backpacking stove.
  • If you want to use 1lb propane tank or butane canister with this stove, you also need to use our convert adapter Z22 or Z10.
  • By using with circle holder, you can use fuel inverted , that allows for more powerful fuel injection for a consistent output, regardless of weather. (NOTE : When you use fuel in inverted position, fuel’s impurities may cause pipe’s clogging easily. Please don’t use fuel in this way frequently.)

 

con-3-2

LARGE POT SUPPORTED

 

  • With Φ6.61’’/16.8cm pot support, you can use a cooker (about 2.0 L) or a frying pan on this backpacking stove.

 

3-4

FOLDABE, EASY TO CARRY & STORAGE

  • You can fold it and put it into storage case. Very convenient to carry with.

3-5

PRE-HEAT PIPE

  • Since the pre-heat pipe is equipped on the side of the burner head, the heat of combustion promotes the vaporization of gas and maintains stable combustion.

climbing gas stove

STAINLESS BRAIDED HOSE

  • The hose is made of stainless steel, durable and flexible.
  • Flow regulator is equipped to adjust the flow rate of gas fuel.

 

portable backpacking gas stove

Package include: 1 * Gas Stove XD-1; 1 * Storage case ; 1 * Circle holder

 

how to assemble a gas stove

HOW TO SET UP

Start with the legs are in folded status.

  1. Put down the leg.
  2. Turn the leg in 180 degrees.
  3. Put down the leg again.
  4. Lift the leg and correct it to a position that can stop it.
  5. Leg is OK !
  6. Unfold three pot support to finish the set-up.

 

There are no reviews yet.

Be the first to review “Portable Camping Backpacking Stove with Flow Regulator for EN417 Lindal Valve XD-1”

Your email address will not be published.