CAMPINGMOON 7.87-inch 8pcs Carbon Steel S45C Black Skin Cation Electrodeposition Coating Tent Stake for Hard Ground T-20-8P

$14.80

  • LENGTH:7.87″ / 20cm; WEIGHT:3.99oz/113g (each piece),31.89oz/904g (8 pieces)
  • MATERIAL:Carbon Steel S45C. Hardness 200HB, sturdier than others’ products (Hardness of most carbon steel S45C products in market is 120HB.). Incredibly strong to holding down your tent on hard ground.
  • Multifunctional to use:Our tent stakes/pegs are designed for anchoring large camping tents and canopies in compact earth and stone. 

logo

tent state condition

Features

3-1

CARBON STEEL S45C FOR MACHINE STRUCTURAL USE

 

  • Hardness 200HB, sturdier than others’ products (Hardness of most carbon steel S45C products in market is 120HB.).
  • Incredibly strong to holding down your tent on hard ground.

3-2

ROUND HOLE & PROTRUSION

 

  • You can use hammer’s claw or tent stake remover to pull it out from the ground quickly.
  • Avoid the rope falling off when the wind blows. Stays firmly in place to keep you safe in a wide range of weather and soil conditions.

3-3

ELLIPTICAL PILLAR SHAPED HEAD & FLAT TIP

 

  • It has a flat head which makes it facilitates hammering.
  • With not too sharp tip for safe storage and transport, also prevents injury when touch it.

 

 

Why choose CAMPINGMOON?ours

  • CAMPINGMOONⓇ USED DOUBLE FILLET WELD IN MANUFACTURING TENT STAKES IN 2003YEAR FIRST. MANY COUNTERFEIT PRODUCTS ARE DISTRIBUTED ALL OVER THE WORLD NOW, BUT DUE TO THE ROUGH WELDING, SURFACE BURRS MAY CAUSE DAMAGE TO THE ROPES.
  • ✓ FLAT AND LARGE RECEIVING AREA FOR EASY HAMMERING.

 

✖ WITH A ROUND HEAD, THE PEGS WILL NOT ABSORB THE ANGLE IMPACT FROM HAMMER CORRECTLY, AND THE DIRECTION WILL BE UNSTABLE.

      ✓ LONG TIP FOR EASY GROUND PENETRATION, AND NOT TOO SHARP TO PREVENT INJURY WHEN TOUCH IT.

✖ SHORT TIP NEEDS MUCH MORE ENERGY TO DRIVING IT INTO GROUND, AND TOO SHARP TIP MAKES INJURY EASILY.

      ✓ DOUBLE FILLET WELD AND SMOOTH SURFACE.

✖ ROUGH ARC WELDING MAKES ROP GET DAMAGE EASILY.

 

Instruction

Instruction

  • 60 degree on the ground
  • Take appropriate depth into the earth, leave about 2.76” out.
  • Use hammer to hit the right place to reach the optimal effect.

Correct way to use

correct wrong

  • The angle between the rope and the stake should be 90 degrees
  • or more, and the stake should not tilt on the tent or tarp side.

 

 

How to remove

remove

  • You could insert a hammer’s claw into the hook or hole on tent stake to pull it out from grounds.
  • If it is hard to be pulled out, insert another stake into the hook or hole on the one you want to pull out, and twist it. Then pull it out with hammer or other tools.

Maintenance

Maintenance

  • Clean and check tent stakes before packing them away.
  • Use an old rag to remove any moisture and debris.
  • Keep them in a storage bag/stake roll is best, where you can notice if any haven’t been collected during pack down.
tent stakes

NOTE : Package includes 8pcs of carbon steel S45C tent stake T-20-8P only. The other products are not included.

  • Our tent stakes use heavy duty steel rods and are designed to secure large tents, canopies and tarp to the hard ground.
  • We recommend to keep them in our storage bag B126 or B135, which you can buy from our store to carry them safely and long last to use.
  • We now have 7.87’’/20cm length and 11.81’’/30cm length stakes/pegs on sale.

 

There are no reviews yet.

Be the first to review “CAMPINGMOON 7.87-inch 8pcs Carbon Steel S45C Black Skin Cation Electrodeposition Coating Tent Stake for Hard Ground T-20-8P”

Your email address will not be published. Required fields are marked *

Categories: ,